FibreMax Aramid Synthetic Successfully Tests at 974 tonnes – More than 2 Million Pounds!

Posted on by admin

FibreMax has successfully performed a break load test on an aramid cable as part of a Lloyd’s certification project for one of its customers. The test was performed at Mennens in Dongen on their 13.500kN test bench and was witnessed by the customer and a surveyor of Lloyd’s Register.

The required break strength of the cable was 9000kN. After pre-loading of the cable in a controlled sequence up to 75% of the breaking strength the cable was pulled to break. At an astonishing load of 9553kN (2,147,599.83 pounds force) the cable was still not broken, but the test was stopped to prevent damage to the test auxiliary hardware.

When the cable was loaded for a second time it finally broke at 9134kN, still well over the required 9000kN. This results proves that due to the unique Endless Winding Technology of FibreMax it is possible to load up cables to 90% of the breaking strength without any problem.

The cable was designed and produced as a cable with “open spelter socket” end terminations. The cable was produced with aramid Twaron® fibres from Teijin Aramid. It is the first time ever in the world that an aramid cable of this size has been produced and successfully pulled to break. The diameter of the cable was approx. 100mm and weighed only 8,50 kg/meter.

Final production of the cables for this project will start within the next weeks and delivery to the customer will be later this year. As soon as the cables have been produced Lloyd’s Register will issue a certification approval on these cables.

Delta Rigging & Tools is the exclusive distributor of FibreMax products in the USA.

For more about FibreMax and this test, go HERE.

Share our content
    This entry was posted in Blogs - Connected, What's New and tagged , , , . Bookmark the permalink.